Gai-tronics 400-003 IEC / ATEX Zone 1 RigCom Station Instrukcja Użytkownika Pobierz pdf (Strona 11)

Pub. 42004-460A

Model 400-003 IEC/ATEX Zone 1 RigCom Station Page: 11 of 16

f:\standard ioms - current release\42004 instr. manuals\42004-460a.doc

09/12

P3 - Balanced / Unbalanced Jumper

Jumper P3 allows the installer to configure the unit for balanced or unbalanced audio connections. If the

header is installed in the BAL position, the assembly is configured for a balanced audio input signal

operation. If the header is installed in the UNBAL position, the assembly is configured for an unbalanced

input signal. In systems where the external control signal is single-ended, the system must be set up as an

unbalanced system.

SW1 - Master/Slave Switch

Switch SW1 allows the installer to configure the unit as a Slave or Master unit. If the switch is in the

SLAVE position, the unit is configured as a Slave. If the switch is in the MASTER position, the unit is

configured as a Master. For Common Line operation, the switch must be in the MASTER position.

Figure 9. RigCom Station PCBA

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17

Brak uwag

Gai-tronics 400-003 IEC / ATEX Zone 1 RigCom Station Instrukcja Użytkownika Strona 11