Gai-tronics MRTI 2000 (No. PL1877A) Microprocessor Radio Telep Instrukcja Użytkownika Pobierz pdf (Strona 131)

PL1877A Microprocessor Radio Telephone Interconnect Features

125 12/10

Parameter Function

NOTE: If you desire to link user IDs in this manner, disable direct access through

parameters 58, 42, and 59.

3. The remaining 15 bytes for this entry consist of the 15 digits of the user capcode.

Any unused bytes must be filled with $FF. There are different valid capcode ranges for

each of the paging types, check parameter descriptions for the appropriate range.

DTMF capcode

Bytes 3-17 contain the DTMF digits to be paged. Thus, a maximum of 15 DTMF digits

can be assigned to a user ID.

2-Tone capcode

Byte 3 contains the code plan to be used when paging this user ID. Refer to the

instructions regarding parameter 1129 in determining a value for byte 3. Bytes 4-6

contain the 2-Tone capcode digits.

Plectron capcode

Enter the 4-digit Plectron capcode in bytes 3-6.

2805/1500 capcode

Bytes 3-17 contain the 2805/1500 pulse digits. Thus, a maximum of 15, 2805/1500

digits can be assigned to a user ID.

Motorola/EIA 5-Tone capcode

Byte 3 designates the preamble tone to be used when paging this user ID. Refer to the

instructions regarding parameter 1130 in determining a value for byte 3. Bytes 4-8

contain the 5-tone capcode.

Byte 9 is the dual-address digit. If the dual-address tone is to be sent with this page,

enter a 1 in byte 9. Otherwise, enter a 0.

Note that byte 9 is used only if dual addressing is enabled via parameter 1012, or if bit y

is set in byte 1 of this user ID entry.

TPL

Byte 3 designates the TPL frequency to be used in signaling this user. Determine this

value from Table 8 on page 135 and enter it in hexadecimal.

For example, a value of 4 designates TPL frequency XB.

DPL

Byte 3 designates the DPL code to be used in signaling this user. Determine this value

from Table 9 on page 136 and enter it in hexadecimal.

For example, a value of $A designates DPL code 071.

Byte 4 must be set to 1 if this DPL code is to be inverted.

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 171 172

Brak uwag

Gai-tronics MRTI 2000 (No. PL1877A) Microprocessor Radio Telep Instrukcja Użytkownika Strona 131